Msi Plessey - Psion Teklogix PX750 User Manual

Chapter 5: Configuration
Decoded (Internal) Scanners
CLSI Editing
When enabled, this parameter strips the start and stop characters and inserts a space after the
first, fifth, and tenth characters of a 14-character Codabar symbol.
Note: Symbol length does not include start and stop characters.
NOTIS Editing
When enabled, this parameter strips the start and stop characters from decoded
Codabar symbol.
Length Restriction
Refer to "Length Restriction" on page 142 for details.
Add/Remove Data
Refer to "Add/Remove Data" on page 142 for details.

5.13.2.13 MSI Plessey

Enabled
Set this parameter to on to enable "MSI Plessey".
Set Length L1 And Set Length L2
Lengths for "MSI Plessey" can be set for Any length, Length within a range, One discrete
length or Two discrete lengths. The length of a code refers to the number of characters (i.e.,
human readable characters), including check digit(s).
Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where
you can define the code length that will be recognized by your scanner.
Choosing One discrete length allows you to decode only those codes containing a selected
length. Choosing Two discrete lengths allows you to decode only those codes containing two
selected lengths. Length within a range allows you to decode a code type within a specified
range from 6 to 55.
Check Digits
Double-tapping on this parameter displays a dialog box in which you can choose One or
Two check digit(s).
If this parameter is set to One, it is assumed that the last digit is a check digit. If "Check
Digits" is set to Two, it is assumed that the last two digits are check digits.
148 Psion Teklogix NEO Hand-Held Computer User Manual