Options Tab; Double Click Parameters - Psion Teklogix PX750 User Manual

Chapter 5: Configuration

Options Tab

5.13.4 Options Tab

This tab allows you to tailor the double-click parameters and the display options associated
with your scanner.

5.13.4.1 Double Click Parameters

Click Time (msec)
This parameter controls the maximum gap time (in milliseconds) for a double-click. If the
time between the first and second clicks of the scanner trigger is within this time, it is con-
sidered a double-click. The allowable range is 0 to 1000. A value of zero disables this
feature.
A double-click produces different results depending on whether or not a value is assigned in
the "Click Data" parameter. When a value is not assigned for the "Click Data", double-click-
ing the scanner trigger overrides the target dot delay set in the "Dot Time" parameter and
initiates a normal scan sweep. If a value is assigned for the "Click Data" parameter, double-
clicking the scanner trigger inserts the "Click Data" value rather than initiating a scan.
Click Data
This parameter determines which character is sent to the application installed in your NEO
following a double-click. A dialog box appears, asking that you press the key you want to
insert. The ASCII/Unicode key value of the keypress is displayed.
168 Psion Teklogix NEO Hand-Held Computer User Manual