Sc264 System Computer; Sc264 Front And Rear Panels - Euphonix System 5 Installation Manual

Euphonix System 5 Installation Guide

SC264 System Computer


VGA Connector (DA-15): Main video monitor connection.

Keyboard (PS/2): Main keyboard connection.

Mouse (PS/2): Main trackball connection.

Serial Port 1 (DE-9): Com1; currently not used. (Com2 is wired internally to the
SNMP board's Com port.)

Serial Port 2 (DE-9, top) and Serial Port 3 (DE-9, bottom): Com3 and Com4, res-
pectively; currently not used

TT002 (75-ohm BNC, DE-9 female, DE-9 male): BNC port is for Bi/Tri-Level Video
input; DE-9 female is for RS422 (Sony 9-pin); DE-9 male is for Midi Machine Control
and Time Code I/O (via breakout cable).

GPIO Port 1 (DC-37): GP Inputs and Outputs 1 to 16.

GPIO Port 2 (DC-37): GP Inputs and Outputs 17 to 32.

LAN Port 1 (Onboard RJ45): Connect to EuCon Network Switch (provided).

LAN Port 2 (Auxilary RJ45): Optional connection for external network. Replaces the
Hybrid Pilot used for DAW integration.

11
USB Ports: Connect a USB memory device to one of these ports for file backup, appli-
cation installations or updates. Connect the Ontrack ADU-200 KVM switch to enable
switching between integrated DAW displays (see page 41).

12
Power Connectors (IEC): Accepts two standard IEC power cords (provided). Two auto-
ranging switching supplies accept voltages between 100–240 VAC, 50–60 Hz.

12


  
Figure 3-8 SC264 Front and Rear Panels
43



  


14 13
11
System 5 Components