Ethernet Cable And Rear Panel Jack; Mc Mix Connected To Router (Left) And Directly To Computer (Right) - Euphonix EuCon User Manual

professional control surface
5. Plug one end of the Ethernet crossover cable into the Ethernet jack (labeled
with
6. Plug the other end of the Ethernet crossover cable into an open Ethernet
jack on your computer, router, or Ethernet switch (Figure 2-9).
An Ethernet router or switch is required to connect additional MC Mix units
or to a local area network. Note that connecting directly to the computer
(Figure 2-9-right) may require removing your Internet cable.
Figure 2-9 MC Mix connected to router (left) and directly to computer (right)
7. Turn on your router (if applicable), then turn on your Mac and wait until it
finishes starting up.
) on the rear panel of the MC Mix (Figure 2-8).
Figure 2-8 Ethernet cable and rear panel jack
Ethernet
cable
Artist Series
17