Summary Of System 5 Components - Euphonix System 5 Installation Manual

Euphonix System 5 Installation Guide
The following chart summarizes this section:
Component
CM401T
Master Module
These two modules make up the center section
of the S5 console.
CM402T Expanded
Channel Module
CM403 Powered Allows installation of joystick panner panel and
film monitor panel.
Console Module
CM408T
Contains 8 physical faders that control two lay-
8-channel Module ers of 8 inputs.
CM411
VGA flat display inside module; can be
VGA Input Module configured with joysticks.
CM409HTP Track
Half-width console section with trackball panner
Panner Module
Ma chine control Interface; GPIO controller;
TT002
Housed in the SC264 System Computer.
MC524
Analog monitor output controller
Monitor Interface
ML530
24 remote-control mic preamps
Mic/Line Interface
Master system computer. Configures DF66.
SC263/SC264
Controls MC524, ML530, and integrated DAWs.
System Computer
Houses the TT002 machine and GPIO controller.
SC263 is used for broadcast.
DF66
Performs all system DSP
SuperCore
CO600
MADI routing hub for Failover System.
Changeover Switch
Provides 24 Analog to MADI Converters, a
AM713
dual-channel
Analog to MADI
S/PDIF), and 2 Aux Analog Inputs.
Converter
MA703 Provides 24 MADI to Analog Converters, a
dual-channel
MADI to Analog
S/PDIF)
Converter
DM714
Provides 24 AES/EBU to MADI Converters, a
dual-channel Aux Digital Input (AES/EBU or
AES/EBU to MADI
S/PDIF)
Converter
MD704
Provides 24 MADI to AES/EBU Converters, a
dual-channel Aux Digital Output (AES/EBU or
MADI to AES/EBU
S/PDIF), and 2 Aux Analog Outputs.
Converter
Provides 56 channels of format converted inputs
FC726
and outputs (112 channels total). Supports
Digital Format
MADI, AES/EBU, T-DIF, ADAT Optical, S-DIF2,
Converter
ProDigi.
Provides up to 64 channels of format converted
inputs and outputs. Supports MADI, AES/EBU,
Modular I/O
Analog, remote-control mic preamps, HD/SD
embedders/de-embedders.
Table 1-4 Summary of System 5 Components
Function
Aux Digital Input (AES/EBU or
Aux Digital Output (AES/EBU or
, and 2 Aux Ana l og Outputs.
, and 2 Aux Anal og Inputs.
18
Number
Ethernet devices. CM40 1T includes
CM401T is
a
TB Mic and expansion port for TB
required.
external switches wiring.
optional Ethernet device
1 required Ethernet device
VGA display device with serial port
.
optional
option for joysticks.
optional
Serial device
Video sync recommended for 9-pin
1 required
operation.
TCC connection to SC263.
1 required
1 MA703 is required (standard).
1 AM713 is required per ML530
7 max
Ethernet device. Connects to control
room display monitor, keyboard, and
1 required
trackball. Connects to MC524 and up
to 7 ML530s via TCC.
Ethernet device. Requires digital
1 required
sync reference.
Optional
Ethernet device.
1 required for
Requires digital sync reference.
each ML530
specified.
1 required for
Requires digital sync reference.
the MC524.
Requires digital sync reference.
Optional
Optional 75-ohm BNC AES/EBU
connectors.
Requires digital sync reference.
Optional
Optional 75-ohm BNC AES/EBU
connectors.
Requires digital sync reference.
Optional
Requires digital sync reference and
ethernet connection for remote mic
Optional
preamps and 8 ch embedder/de-
embedder.
System 5 Overview
Notes