Euphonix System 5 Installation Manual page 34

Euphonix System 5 Installation Guide
MADI Hookup
DF66 - 1 MADI
(Main DSP) I/O
Figure 2-14: MADI hookup: primary DF66 SuperCore, CO660 Changeover Switch, backup DF66 SuperCore
NOTE: It is the responsibility of the system designers, system integrators, and end
users to assure that the choice of cabling, terminations, equalizations, etc. con-
form to the recommended practice. Although maximum recommended distan-
ces over copper can be exceeded with the use of high performance compo-
nents (including cables), it is not Euphonix's intention to endorse any particular
brand or method of achieving the end result.
To/From MADI
1 1
1
2 2 DSP A
MADI
3 3 I/O
4 4
- Each Green interconnect line represents four (4) MADI
connections.
- A single CO600 can hold four (4) CO601 Changeover cards.
- Each CO601 is capable of handling 4 In, 4 Out MADI
connections from and to input/output converters. It
distributes/switches these inputs/outputs to and from each
DF66 DSP core.
- Interconnections between CO600 and DF66 are made using
Euphonix-supplied cabling.
- Input and output from the CO600 is provided by Euphonix-
supplied cabling, terminating to BNC "Bulkhead" panels.
- Above Configuration shows a total of 16 MADI connections in
and out of the CO600/DSP
*) Output Port 1, MADI connection #1 is reserved for the
MA703/MC524 monitoring output
Interconnecting System Components
Converters*
1
2 3 4
System DSP B 2
MADI MADI
I/O I/O 3
CO600
4
34
1
2
MADI DF66 - 1A
I/O (Backup DSP)
3
4