Sc263 System Computer; Sc263 Front And Rear Panels - Euphonix SYSTEM 5 Installation Manual

Euphonix System 5 Installation Guide

SC263 System Computer

j
VGA Connector (DA-15): Main video monitor connection.
k
Keyboard (PS/2): Main keyboard connection.
l
Mouse (PS/2): Main trackball connection.
m
Serial Port 1 (DE-9):
n
Serial Port 2 (DE-9):
o
Serial Port 3 (DE-9):
p
LAN Port 1 (Onboard RJ45): Connect to EuCon Network Switch via RJ45 (provided).
q
LAN Port 2 (Auxilary RJ45): Optional connection for external network.
r
SNMP LAN Port (RJ45): Connect this port to a network with SNMP monitoring or e-mail
services to enable the hardware monitoring system to report errors.
s
USB Ports: Connect the USB MIDI Interface to one of these ports. Connect a USB
memory device to one of these ports for file backup, application installations or updates.
¡
11 Power Connectors (IEC): Accepts two standard IEC power cords (provided). Two autorang-
i ng switching supplies accept voltages between 100–240 VAC, 50–60 Hz.
Connect the machine room KVM extender (transmitter end) to the VGA, keyboard, and
mouse connectors to the rear panel of the SC263. A second KVM extender (receiver end)
should be installed at the control surface, close to where the Emix monitor, keyboard and
mouse are to be located. The KVM extenders are connected by a single CAT5 cable built
into the console ethernet harness (provided).
¡
11
r
l
k m j
Figure 3-7 SC263 Front and Rear Panels
38
n
p q
o
s
System 5 Components