Stagebox Configuration #1; Local-Side Interface Configuration #1 - Euphonix System 5 Installation Manual

Hide thumbs Also See for System 5:

Table of Contents

Euphonix System 5 Installation Guide

System 5 Components

Figure 3-34 Stagebox configuration #1

IO95 Modular I/O Frame: The IO95 frame is a double-sided 3RU frame identical

to the IO93 frame, except for an audio buss modification. This modification con-

sists of separating audio busses on the rear-plane to provide four "positions" to be

used as local-side interfaces for redundant MADI-over-fiber stageboxes. Each of

these positions may be fitted with an MM936 MADI In/Out (redundant fiber) and

an MM934 MADI In/Out (coax) to act as redundant MADI-over-fiber-to-MADI

coax converters. The MM936 configuration is done via the FC972 Remote also in-

stalled in the frame. Sync is handled by the SY983 Sync module. Other slots may

be used for additional I/O as these audio busses have no interaction with the four in-

terface positions. Sync and remote modules are shared thoughout the entire frame.

The frame PSUs provide 12 amps@5vDC. See figure 3-35.

Figure 3-35 Local-Side Interface configuration #1

Table of Contents