Qlogic Fibre Channel Switch Event Message Manual page 43

A
(I) (8400.0038) (Switch) (LCFEnable automatically set to False since MFSEnable has been
set to True)
Meaning:
(I) (8400.0039) (Switch) (MFSEnable automatically set to False since VIEnable has been set
to True)
Meaning:
(I) (8400.003A) (Switch) (MFSEnable automatically set to False since LCFEnable has been
set to True)
Meaning:
(I) (8400.003E) (Switch) (Readjusting TempMonitoringWarning from
Meaning:
(I) (8400.0040) (Switch) (Readjusting TempMonitoringFailure from
Meaning:
(I) (8400.0048) (Switch) (A CIM edit session has been canceled)
Meaning:
(I) (8600.0007) (PortApp) (Port:
Meaning:
(I) (8700.0002) (EPort) (In Fabric Reconfiguration)
Meaning:
(I) (8700.0003) (EPort) (Topology change, switch with domain ID
fabric)
Meaning:
(I) (8700.0004) (EPort) (Port:
switch_WWN
Meaning:
59060-01 B
Setting the Set Config Port parameter MFSEnable to True
automatically sets the Set Config Port parameters VIEnable and
LCFEnable to False.
Setting the Set Config Port parameter VIEnable to True
automatically sets the Set Config Port parameter MFSEnable to
False.
Setting the Set Config Port parameter LCFEnable to True
automatically sets the Set Config Port parameter MFSEnable to
False.
The temperature threshold at which the switch issues a warning
alarm is being changed.
The temperature threshold at which the switch issues a failure
alarm is being changed.
A Common Information Model (CIM) edit session has been
cancelled.
) (Cancelling Online Test)
port_number
The online test was canceled.
Changes to the switch configuration are in progress.
A switch with the given domain ID has joined the fabric.
) (Remote Switch World Wide Name (WWN) is
port_number
)
A switch with the given domain ID has been discovered on the
given port.
3 – Event Messages
Informative Events
C to
value value
C to C)
value value
joined the
domain_ID
C)
3-31