Qlogic Fibre Channel Switch Event Message Manual page 23

A
(A1004.003F) (Request for Domain ID rejected, WorldWide Name (WWN)
allowed to join fabric.)
Meaning:
Action:
(A1004.0040) (World Wide Name (WWN)
binding indicates it should use
Meaning:
Action:
(A1004.0041) (Eport isolating due to E_Port License Exceeded.)
Meaning:
Action:
(A1005.0006) (Request from WWN
verify MS security configuration)
Meaning:
Action:
(A1005.000A) (Cannot enforce zoning for member
member will be ignored)
Meaning:
Action:
(A1005.000C) (Configuration error, insufficient credit in pool. Extended credit not granted
for port
Meaning:
Action:
(A1005.000D) (Configuration error, insufficient credit in pool. Extended credit not granted
for port
Meaning:
Action:
59060-01 B
The switch with the specified WWN is not allowed to join the fabric.
Add the switch to a group in the active security set.
device_WWN
User activated fabric binding conflicts with the current domain ID
assignment.
Change the domain ID of the named device and then reconfigure
the fabric.
An E_Port isolated because all licensed E_Ports are in use.
Obtain a license key to license additional E_Ports.
device_WWN
Management server authentication is enabled, and the received
frame failed authentication.
None
A zone member given by domain ID and port number could not be
found in the fabric.
Examine the fabric connections and zoning definitions.
)
port_number
Insufficient credits were available in the credit pool to grant the
credit request.
Decrease the number of requested credits or add more donor
ports.
port_number )
Insufficient credits were available in the credit pool to grant the
credit request.
Decrease the number of requested credits or add more donor
ports.
assigned domain
domain_ID .)
address FC_address
,
domain_ID port_number
3 – Event Messages
Alarm Events
not
device_WWN
, fabric
domain_ID
, failed authentication,
, this zone
3-11