Qlogic Fibre Channel Switch Event Message Manual page 42

3 – Event Messages
Informative Events
(I) (8400.0006) (Switch) (Admin mode for user
account_name
Meaning:
(I) (8400.001A) (Switch) (Admin access has timed out for user
Meaning:
(I) (8400.0022) (Switch) (Successful login user
Meaning:
(I) (8400.0023) (Switch) (Successful login user
Meaning:
(I) (8400.0024) (Switch) (Successful login user
Meaning:
(I) (8400.0025) (Switch) (Successful login user
Meaning:
(I) (8400.0026) (Switch) (A zoning configuration edit session has been canceled)
Meaning:
(I) (8400.002B) (Switch) (User login
have been disabled)
Meaning:
(I) (8400.002C) (Switch) (User login session
Meaning:
(I) (8400.0036) (Switch) (Hotreset not permitted at this time, try again later)
Meaning:
(I) (8400.0037) (Switch) (VIEnable automatically set to False since MFSEnable has been set
to True)
Meaning:
3-30
account_name
)
An Admin session was canceled by another user interface session
that had the authority to do so.
The Admin session opened by the named user has timed out due
to inactivity.
account_name
A user with admin authority has successfully logged into the
switch. The IP address of the user is unknown.
account_name
A user with admin authority has successfully logged into the
switch. The IP address of the user is unknown.
account_name
A user without admin authority has successfully logged into the
switch. The IP address of the user is unknown.
account_name
A user without admin authority has successfully logged into the
switch. The IP address of the user is unknown.
The zoning configuration edit session has been canceled as a
result of the Zoning Cancel command.
account_name
The session has been closed as a result of a configuration change.
session_ID
A user login session has ended because of inactivity.
Conditions exist that will not allow a hotreset. Try again later.
Setting the Set Config Port parameter MFSEnable to True
automatically sets the Set Config Port parameters VIEnable and
LCFEnable to False.
was canceled by user
account_name
with admin privilege)
with admin privilege)
without admin privilege)
without admin privilege)
is being closed - In-Band connections
user
account_name
A
)
has timed out)
59060-01 B