Qlogic Fibre Channel Switch Event Message Manual page 18

3 – Event Messages
Alarm Events
(A1003.0035) (Merge failed, invalid zone data received, ISOLATING)
Meaning:
Action:
(A1003.0036) (Merge failed, member limit for zone
member_number
Meaning:
Action:
(A1003.0037) (Merge failed, Total zone member limit would be exceeded)
Meaning:
Action:
(A1003.0038) (Merge failed, Total zones in zonesets limit would be exceeded.)
Meaning:
Action:
(A1003.0039) (Merge failed, total zone limit would be exceeded.)
Meaning:
Action:
(A1003.003A) (Zone Merge conflict for ZoneSet
zone_name
Meaning:
Action:
(A1003.003B) (Incomplete merge request sequence received, unable to process request.)
Meaning:
Action:
3-6
A remote switch sent a zone merge that was invalid.
Reconcile interoperability modes on the local and remote switches
so that they are the same.
, limit= member_limit
A fabric merge failed because the combined number of members
in two zones having the same name exceeds the limit for the
number of members in a zone.
Remove members from the zone on the local switch or the remote
switch so that the combined sum is less than member limit.
A fabric merge failed because the total number of zone members
exceeds the zoning database limit.
Remove zone members from the local switch or the remote switch
so that the combined sum is less than member limit.
A fabric merge failed because the total number of zones in zone
sets exceeds the zoning database limit.
Remove zones from the local switch or the remote switch so that
the combined sum is less than zones in zone sets limit.
A fabric merge failed because the total number of zones exceeds
the zoning database limit.
Remove zones from the local switch or the remote switch so that
the combined sum is less than maximum zone limit.
, check type or members), ISOLATING)
A fabric merge failed because two zones of the same name in two
zone sets of the same name have different membership.
Reconcile the membership in the two zones so that they are the
same.
A remote switch sent a merge request that was not understood.
Check the remote switch for configuration errors or equipment
malfunction.
exceeded, (size=
zone_name
))
(Zone mismatch for zone=
zone_set_name
A
59060-01 B