Qlogic Fibre Channel Switch Event Message Manual page 27

A
(A1007.0013) (Response from address
Meaning:
Action:
(A1007.0014) (Response from WorldWide Name (WWN)
failed authentication, discarding)
Meaning:
Action:
(A1007.0026) (Unable to validate Chap Response from
misconfiguration or security breach attempt.)
Meaning:
Action:
(A1007.0027) (Radius server could not validate authentication response from
Meaning:
Action:
(A1007.0032) (Fabric conditions or configurations do not currently allow for changing
fabric binding.)
Meaning:
Meaning:
(A2000.0001) (Pwr1 removed - ALARM SET)
Meaning:
Action:
59060-01 B
FC_address
A response received on the indicated port lacked Common
Transport (CT) authentication.
Verify that the CT security configuration of the management
application using the remote port is compatible with the
configuration of the Management Server security group on the
switch.
A request received on the indicated port failed Common Transport
(CT) authentication.
Verify that the CT security configuration of the management
application using the remote port is compatible with the
configuration of the Management Server security group on the
switch.
A CHAP authentication attempt failed due to failure while
comparing secrets.
Check security configuration.
RADIUS authentication failed.
Confirm that the secret is the same on the switch as it is on the
RADIUS server.
An attempt to change the fabric binding setting was rejected due to
current fabric binding configuration settings within the active
security set.
Check fabric binding settings and the domain IDs of the switches
within the fabric. Add missing switches to the ISL group of the
active security set.
Power supply #1 was has failed or was removed from the switch.
Contact your authorized maintenance provider.
, lacks authentication, discarding)
address
device_WWN
, possible Chap secret
device_WWN
3 – Event Messages
Alarm Events
,
FC_address
)
port_number
3-15