Qlogic Fibre Channel Switch Event Message Manual page 26

3 – Event Messages
Alarm Events
(A1006.0004) (Zoning conflict,
a soft zone)
Meaning:
Action:
(A1006.0005) (Zoning enforcement error in Nameserver)
Meaning:
Action:
(A1006.0006) (Zoning conflict,
zone, but
Meaning:
Action:
(A1007.0002) (Security: WWN
(A1007.0002) (Security: Local switch not configured for chap, failing authentication)
(A1007.0002) (Security: Switch with WWN
(A1007.0002) (Remote Switch with World Wide Name (WWN)
chap, no chap configured for local switch. 2-way Authentication Failure)
Meaning:
Action:
(A1007.0012) (Port with World Wide Name (WWN)
authorized to login, verify MS security configuration)
Meaning:
Action:
3-14
device_WWN
The named zone members cannot communicate because they are
members of different ACL hard zones.
Place both zone members in the same ACL hard zone or exclude
both from ACL hard zones.
An error occurred while checking ACL zoning.
Contact your authorized maintenance provider.
device_WWN
share a soft zone)
device_WWN
The named zone members cannot communicate because they are
members of different ACL hard zones.
Place both zone members in the same ACL hard zone or exclude
both from ACL hard zones.
not Authorized to join))
device_WWN
device_WWN
The device WWN is either not configured in the security data base,
or it is not configured for Challenge Handshake Authentication
Protocol (CHAP).
Add the device WWN to the active security set if it missing, or
modify the group to allow for CHAP authentication with the other
devices.
The port cannot login with the current security configuration.
Add the named port to the Management Server group in the active
security set.
is in an ACL hard zone, but
and do not share an ACL hard
device_WWN
not Authorized to join)
device_WWN
address
port_WWN
A
share
device_WWN
configured for
not
FC_address
59060-01 B