Informative Events - Qlogic Fibre Channel Switch Event Message Manual

3 – Event Messages

Informative Events

(W) (8F00:000E) (Link Status
Meaning:
3.4
Informative Events
(I) (8200.0001) (mserver) (Hotreset is not permitted at this time, try again later)
Meaning:
(I) (8200.0002) (mserver) (Port:
inband management is disabled on port
Meaning:
(I) (8200.0100) (mserver) (Cannot map
Symbolic Name (max
Meaning:
(I) (8200.0101) (mserver) (Cannot map non-printable characters to Switch Symbolic Name)
Meaning:
(I) (8200.0200) (mserver) (Rejecting request (GZM) for zone
unsupported alias member(s)
Meaning:
(I) (8200.0201) (mserver) (Rejecting request
Meaning:
3-28
)
status
The severity of the link status has changed. The description field
will show the reason for link status.
The switch was busy at the time of the attempted hot reset. Try the
hot reset again later.
) (Rejecting request from address
port_number
A Management Server command was received on a port that is
configured to be disabled for inband management requests.
number_of_characters
number_of_characters
The RIELN management server command was processed, and the
Interconnect Element Logical Name was registered. However, the
registered name is of greater length than the maximum length
allowed for the Switch Symbolic Name, so therefore the Switch
Symbolic Name was not changed to match the registered name.
The RIELN management server command was processed, and the
Interconnect Element Logical Name was registered. However, the
registered name contains unprintable characters. These characters
are not allowed for the switch symbolic name, therefore the switch
symbolic name was not changed to match the registered name.
The fabric zone server command GZM (Get Zone Member) was
rejected because the requested zone member was an alias which
is not defined in GS-3.
command
A fabric zone server command was rejected for the reason detailed
in the message. This can be caused by two users attempting to
configure the switch or zoning database at the same time. Contact
your authorized maintenance provider if the reason for the failure is
not clear.
)
port_number
characters to Switch
))
containing
zone_name
: )
command
A
,
FC_address
59060-01 B