Customizing The Home Screen; Manual Defrost And Clean Mode - Emerson E2 Installation And Operation Manual

Keys
 
Suction Summary
+
 
Circuit Summary
+
General
 
Global Data Status
+
 
Expanded Info
+
 
Graph Current Application
+
 
Input Definitions
+
 
Output Definitions
+
 
Log Current Application
+
 
Maintenance Log
+
System
 
Add/Delete Application
+
 
Toggle Full Options
+
 
Serial Setup
+
 
Network Status
+
 
TCP/IP setup
+
 
Firmware Version
+
 
System Logs and Stats
+
 
Switch language
+
Edit
 
Edit Mode
+
 
Insert Mode
+
 
Names Mode
+
Table 12-8 - Shortcut Keys

Customizing the Home Screen

Function
12.5 Customizing the
Home Screen
The Home screen can be customized to show different
information depending on the user's needs. If you wish to
change the Home screen from the default screen, follow
the steps below. There are eight different screen options
available with the Device Summary screen as the default
choice.
NOTE: Toggle Full Options must be on in or-
der to customize the Home screen. FULL will
appear at the top right of your screen when
Full Options are enabled. To toggle quickly to Full

Options, press the key and

1. Press the button to open the Main Menu
screen.

2. Press for the System Configuration screen.

3. Press
for the System Information screen.

4. Press for General Controller Info and scroll
down to RX Home Screen or BX Home Screen
depending on which controller you are using.
Press (LOOK UP) to open the Option List
5.
Selection menu.
6. Choose the desired Home screen from the list.
7. Log off to save changes.
12.6 Manual Defrost and
Clean Mode
A circuit can be placed in manual defrost from the RX
Home screen or a Circuit Status screen. If a refrigeration
circuit needs to be placed in manual defrost, follow these
steps:
Press  (CIRCUITS) to go to the Circuits Sta-
1.
tus screen, or place the cursor on the desired cir-
cuit from the Home screen and press
open the Actions Menu. Select Manual Defrost.
2. Once inside a Circuits Status screen, press
to open the Actions menu.
3. Select Manual Defrost from the list and the Cir-
Operator's Guide to Using the E2

together.

to

• -
12 9