Checking Boards Online; Checking Status Screens - Emerson E2 Installation And Operation Manual

12.8 Checking Boards
Online
Figure 12-17
- Network Summary Screen
You can check all boards that are on either the Echelon
Network (E2 controllers) or the I/O Network from the Net-
work Summary screen (See Figure 12-17). This screen
displays information such as board status, name of the
device, type of device (board, controller, etc.), firmware
revision, the network address for each device, the number
of Echelon controllers (E2s) that are online or offline, and
the number of I/O boards online or offline. After determin-
ing which board is offline, turn to Appendix F: Trouble-
shooting for more information.
To access the Network Summary screen:
1. From the Main Menu screen, press
for the Status menu.

2. Press (Network Summary) and the Network
Summary screen will be displayed.
The Network Summary screen can also be accessed
by:
1. From the Main Menu screen, press
Configuration).

2. Press (Network Setup) for the Network Setup
menu.

3. Select (Network Summary) and the Network
Summary screen opens.
NOTE: Jump directly to the Network Sum-
mary screen by pressing the
together. For a complete list of Hot Keys, press

and the  keys together.
the

Checking Boards Online

12.9 Checking Status
Screens
Figure 12-18
each accessible (from the Home screen) by pressing the
corresponding function key (see Figure 12-18). The Suc-
tion Group status screen, the Condenser status screen, the
Circuits status screen, and the Sensors status screen can all
be accessed by pressing one of the function keys (-
) if the application has been added to the E2.
Suction Group Status Screen
played with information such as active stages, discharge
temperature, current setpoint, associated condenser, and
other general information.
Condenser Status Screen
trol setpoints, detailed fan status, and other general infor-
mation will be displayed.
Circuit Status Screen
the arrow buttons and press
current temperature, current state, individual case informa-

(Status)
tion, and other information are given.
Sensor Status Screen
press
mand values will be displayed. The analog sensor will
have Cut In/Cut Out temperature values.

(System
Figure 12-19
each accessible (from the Home screen) by pressing the
corresponding function key.
AHU Status Screen
 
temperature, season mode, space humidity, apparent tem-
and keys
perature, heat/cool mode, fan state, economization status,
dehumidification, and humidity status are all included on
this screen.
- RX Function Button Menu
The E2 RX controller has four status screens that are
Press . The suction group selected will be dis-
Press . Information on the condenser such as con-
Press . Select which circuit status to view with

Press . Select an analog or digital sensor and

. Information such as control value, and com-
- BX Function Button Menu
The E2 BX controller has four status screens that are
Press . The AHU information such as control
Operator's Guide to Using the E2
. Information such as
• -
12 11