Gestures; Home Browsing; Stand-By Mode; Programming Menu - Emerson Dixell XR70T Installing And Operating Instructions

4.3

GESTURES

GESTURE NAME
ONE TAP
TAP and
HOLD
H-SWIPE
V-SWIPE
4.4

HOME BROWSING

Use H-SWIPE to move through the screens. The logic implements a circular browsing: H-SWIPE to left or to
right is possible. A programmable timeout is implemented to return HOME from any lateral screen.
4.5

STAND-BY MODE

When in HOME screen, H-swipe to go to the Virtual Keyboard screen and then touch the OFF icon for 3 sec.
All outputs and alarms are deactivated in Stand-by mode.
4.6

PROGRAMMING MENU

It is possible to unlock the programming menu by touching any area of the display for 3 sec. Both SET and
PRG icons will blink until the programming menu is unlocked.
1592040000 XR70T EN v1.1 2019.07.09
HOW-TO
Press a specific area
of the screen with a
finger for 1 sec
Press any place of
the screen with a
finger for 3 sec
Drag a finger across
the screen, from left
to right or from right
to left
Drag a finger across
the screen, from top
to bottom or from
bottom to top
(overlapping only one
of the digits)
DESCRIPTION
Switch ON / Switch OFF: when in Virtual
Keyboard, use this to turn on/off a specific
function. When in Programming mode, use this to
select a parameter or a parameter value.
Enter / Save: use this to enter Programming
mode or Parameter menu and to save
modifications. When in Virtual Keyboard, use this
on the "ONOFF" to switch OFF and ON the
device.
Browse: use horizontal swipe (right to left or left
to right) to browse through HOME, Virtual
Keyboard and Info View. When in programming
mode: use horizontal swipe to browse through
parameter menu.
Modify: use vertical swipe (from top to bottom or
bottom to top) to change a parameter value.
XR70T 10/40