Toggling Full Options; Navigation; Menus - Emerson E2 Installation And Operation Manual

For rx refrigeration, bx hvac, and cx convenience store controllers
Hide thumbs Also See for E2:
Table of Contents

Advertisement

12.3 Toggling Full Options

Toggling Full Options on allows you to have full
access to programming applications. To Toggle Full
Options on:
1.
Press the
key
2.
Select
(System Configuration)
3.
Select
(System Information)
4.
Select
(Toggle Full Options)
FULL will appear in the top right corner of the screen
when Full Options is enabled. Pressing
Options on and off.

12.4 Navigation

12.4.1 Menus

Main Menu
The Main Menu is accessed by pressing the
key. This menu gives you direct access to applications
such as Suction Groups, Condensers, Circuits, Air Han-
dling Units, Zones, Light Schedules, and Sensor Controls
applications, (depending on which controller type you are
using) as well as all configured applications in the control-
ler. The Main Menu also allows you to add and delete
applications, gives system configuration abilities, and
shows status information for inputs and outputs, network,
graphs and logs.
Figure 12-4
- Main Menu
Toggling Full Options
The System Configuration Menu
toggles Full
Figure 12-5
used to set up the E2. Included options are Input/Output
Definitions, internal system information, remote commu-
nications, global data, alarm, logging, and network setup
information.
items:
1 - Input Definitions
2 - Output Definitions
3 - System Information
4 - Remote Communica-
tions
Table 12-2 - System Configuration Menu Options
- System Configuration Menu
The System Configuration Menu is one of the menus
To open the System Configuration menu:
1.
Press
2.
Press
(System Configuration)
The System Configuration menu contains nine menu
Menu Option
View the status of all input
boards, as well as set up indi-
vidual points on the I/O
boards.
View the status of all output
boards, as well as set up indi-
vidual points on the I/O
boards.
Menu that gives access to
more E2 setup options and
information.
Gives access to modem infor-
mation, dial-out setup, and
TCP/IP.
Operator's Guide to Using the E2
Description
-
12
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents