Emerson E2 Installation And Operation Manual page 208

Menu Option
5 - Alarm Setup
6 - Logging Setup
7 - Network Setup
8 - Global Data
9 - Licensing
Table 12-2 - System Configuration Menu Options
The System Information Menu
Figure 12-6
- System Information Menu
The System Information menu is used to set up the E2.
The options in this menu allow setting up time and date,
•
12-4 E2 RX/BX/CX I&O Manual
Description
Set up dial-outs and alarm
reporting for the current E2.
Enter information about Log-
ging Group applications such
as the sampling frequency
and total number of samples.
Accesses the Network Setup
menu where you can view
and/or change the configura-
tion of the Echelon and
RS485 I/O Networks, set up
boards, controllers, routers,
and make controller associa-
tions.
Configure one or more ana-
log or digital sensors to be
used as "global" values by all
E2s.
Select this option to access
the License Report screen
that lists all the applications
in E2 that are currently
licensed and the number of
each type of applications that
are in use. You can also add
additional licenses by press-
ing F1.
passwords, toggle full options, general information about
the controller, and other important data.
The System Information Menu is another menu used to
set up the E2. The options in this menu allow setting up
time and date, passwords, toggle full options, general
information about the controller, and other important data.
To open the System Information Menu:

1. Press

2. Press (System Configuration)

3. Press (System Information)
The System Information menu contains nine menu
items:
Menu Option
1 - General Controller
Info
2 - Time and Date
3 - Passwords/User
Access
4 - Firmware Revision
Table 12-3 - System Information Menu Options
Description
Edit general information
about the E2, such as engi-
neering units, and summer/
winter change-over specifica-
tions.
Change the current date and
time, and specify date for-
mats.
Set up usernames and pass-
words, and define security
level requirements.
Read-only information
screen that contains current
system version information
026-1614 Rev 4 5-JAN-2013