Screen Types; The Main Menu; Status Screens - Emerson E2 Installation And Operation Manual

10.7 Screen Types

10.7.1 The Main Menu

Figure 10-8
- The Main Menu (RX version shown)
The Main Menu is accessed by pressing the
key. This menu gives you direct access to applications
such as Suction Groups, Condensers, Circuits, Air Han-
dling Units, Zones, Light Schedules, and Sensor Controls
applications, (depending on which controller type you are
using) as well as all configured applications in the control-
ler. The Main Menu also allows you to add and delete
applications, gives system configuration abilities, and
shows status information for inputs and outputs, network,
graphs and logs.

10.7.2 Status Screens

Figure 10-9
- Status Screen (RX version shown)
Status screens are real-time views of application func-
tions. They show the current status of all outputs, the cur-
rent values of all inputs, and other important data such as
control setpoints, run times, and whether or not bypasses
or overrides are active.
Screen Types
Each status screen is specially designed to provide a
concise at-a-glance view of how one or more systems are
functioning.
TIP: To view the Suction Group Status screen
in the RX controller, start from the Home
screen. Press the function key  (SUC-
TION GRP). If more than one Suction Group has been
set up, the Suction Group Summary screen opens.
Choose which application you wish to view with the
cursor and press
and HP rating for each compressor are displayed in
this screen.
To view other application types, use the function
keys , , and  (see Table 10-2) to see the
condenser, circuits, and sensor control status screens.

Key Function for RX Function for
! Suction Group
@ Condensers
# Standard and
Case Circuits
$ Sensor Control
Power Monitor-
%
Table 10-2 - Status Screen Function Keys
Status screen functions are explained in more detail in
Section 12, Operator's Guide to Using the E2 of the man-
ual. For now, press
screen: the Actions menu.

. The current status, runtime,
BX
AHU
Zones
Lighting
Sensors
and
ing
Setup Setup

to access another important
Function for
CX
AHU
Lighting
Circuits
Sensors
Setup
• -
Quick Start 10 5