System Configuration Menu - Emerson E2 Installation And Operation Manual

elements. For more details on Setup screens, see Section
10.18.2.3, Navigating the Setup Screen.

10.7.5 System Configuration Menu

Figure 10-12
- System Configuration Menu
The System Configuration Menu is one of the menus
used to set up the E2. Included options are Input/Output
Definitions, internal system information, remote commu-
nications, global data, alarm, logging, and network setup
information.
To open the System Configuration menu:

1. Press

2. Press (System Configuration)
The System Configuration menu contains nine menu
Screen Types
items:
Menu Option
1 - Input Definitions
2 - Output Definitions
3 - System Information
4 - Remote Communica-
tions
5 - Alarm Setup
6 - Logging Setup
7 - Network Setup
8 - Global Data
9 - Licensing
Table 10-4 - System Configuration Menu Options
Description
View the status of all input
boards, as well as set up indi-
vidual points on the I/O
boards.
View the status of all output
boards, as well as set up indi-
vidual points on the I/O
boards.
Menu that gives access to
more E2 setup options and
information.
Gives access to modem infor-
mation, dial-out setup, and
TCP/IP.
Set up dial-outs and alarm
reporting for the current E2.
Enter information about Log-
ging Group applications such
as the sampling frequency
and total number of samples.
Opens the Network Setup
menu, where options to view
network status, add or delete
boards and controllers, com-
mission devices, set up a
router, and make board asso-
ciations are available.
Configure one or more ana-
log or digital sensors to be
used as "global" values by all
E2s.
Opens the Licensing Report
page with a list of all licensed
features on the current E2,
and allows additional fea-
tures, after a password key
has been entered by the user,
to be enabled.
•
Quick Start 10
-
7