Multiflex Boards; Multiflex 16 Input Board; Multiflex Combination Input/Output Boards - Emerson E2 Installation And Operation Manual

custom cell in Einstein/E2
P/N Gateway Model
810-3500 RF Gateway
810-3700 IRLDS II Gateway
810-3760 RLDS Gateway
810-3710 Danfoss MicroCool Gateway
810-3711 Woodley Case Controller Gateway
810-3712 Woodley Pack Controller Gateway
810-3720 Cutler Hammer Breaker Gateway
810-3721 Square D Breaker Gateway
Table 2-5 - Gateway Board Models
2.2.2

MultiFlex Boards

The MultiFlex line of control system boards provides a
wide variety of input, output, and smart control solutions,
all of which are based on a single universal hardware plat-
form. The board design uses flash-uploadable firmware
and plug-in expansion boards to configure the base plat-
form board and apply it for use as an input board, relay
output board, analog output board, or a combination I/O
board.
2.2.2.1

MultiFlex 16 Input Board

Figure 2-6
- MultiFlex 16 Input Board
The MultiFlex 16 input board offers sixteen combina-
tion analog/digital input points for use by Emerson Retail
Solutions E2, Einstein, and REFLECS control systems.
The MultiFlex 16 may be used in retrofits with no addi-
tional hardware or software setup or upgrades.
•
2-4 E2 RX/BX/CX I&O Manual
The MultiFlex 16 is designed to be 100% compatible
with the previous generation of Emerson Retail Solutions
input boards (the 16AI), communicates with the site con-
troller via an RS485 connection to a REFLECS COM
A&D Network or an E2 I/O Network. Dip switches on the
board set the network ID (board number) and baud rate.
The board also provides both +5VDC and +12VDC
output voltage points for use in powering transducers or
other input devices that require power.
The MultiFlex 16 has a Hand-held Terminal interface
Section 2.2.4, Hand-held Terminal (P/N 814-3110) that
may be used by technicians to view the input voltage and
engineering unit values for each input point without need
of a voltmeter or front panel controller display.
Table 2-6 shows the part number of the MultiFlex 16.
P/N Model Name
810-3013 MultiFlex 16
Table 2-6
- MultiFlex 16 Input Board Model
The MultiFlex 16 is designed with several features
that make it easy to install, wire, and configure. These
main user interface features are shown in Figure 2-6.
2.2.2.2 MultiFlex Combination Input/
Output Boards
Figure 2-7
- MultiFlex Combination Input/Output Board (Side
View)
Description
16 analog/digital in-
puts, no outputs
026-1614 Rev 4 5-JAN-2013