The Actions Menu; The Setup Screens - Emerson E2 Installation And Operation Manual

10.7.3 The Actions Menu

Figure 10-10
- The Actions Menu
The Actions Menu is available from any status screen

by pressing Enter , and may be used to do just about
any task in the E2 system software. This screen lists a
number of options that can be used to affect a selected
field, an entire application, or the E2 in general.
Actions Menu Item
Graph Opens graph view for the selected
Log Opens the Log screen of the
Override Opens the Override Update win-
dow where the selected input or
output can be overridden to a
Expanded Information Displays detailed information
Table 10-3 - Actions Menu Options and Descriptions
•
10-6 E2 RX/BX/CX I&O Manual
Description
value.
selected value.
user-defined value or state.
about the selected value.
Actions Menu Item
Setup Opens the setup screen for the
Detailed Status Special status screen that shows
detailed setpoints and input/out-
put information with complete
summary of inputs, outputs.
Manual Defrost For circuits only. Opens the Cir-
cuit Bypass screen to force a man-
ual or emergency defrost, or wash
Application Com- Allows Service Start/End for Irri-
mands gation and Pulse Accumulation
Applications Logs/
Graphs
Table 10-3 - Actions Menu Options and Descriptions
One of the more important features of the Actions

Menu is the Setup screen
screen will vary, depending on where the cursor is placed
in the Main Status (Home) screen before
This is the easiest way to edit an existing application.
For more information on usage of the Setup screen and
how to implement its functions, see Section 12.11.1.2,
Setup Screens.

10.7.4 The Setup Screens

Figure 10-11
- Typical Setup Screen
Setup screens are the interface used to change settings
and setpoints, and define inputs and outputs in the E2.
Figure 10-11 shows a typical Setup screen and its primary
Description
selected value.
mode.
applications.
• Opens various log and
graph screens for Anti-
sweat and Pulse Accumu-
lation applications.
• Opens the Circuit Report
screen for standard circuits
only.
(Setup). The actual setup

is pressed.
026-1614 Rev 4 5-JAN-2013