Protecting A Project - Zoom MRS-1608 Operation Manual

Protecting a project

This operation lets you write-protect the currently loaded
project, which disables project storing and editing. When
protect is ON, the following operations will be
impossible.
• Erasing a project
• Editing or recording on the recorder
• Changing the V-take
• Editing a patch (including module on/off)
• Recording or editing a rhythm pattern or
rhythm song
• Saving/deleting scenes, making marker
settings, etc.
• Creating a phrase loop
• Creating sample data for the pad sampler
function
1.
Refer to steps 1 – 2 of "Basic procedure" to
bring up the indication "PROJECT
PROTECT" on the display. Then press the
[ENTER] key.
The screen for setting the protect status to ON/OFF is
shown on the display.
PRJ PRT PRJ PRT
OFF OFF
2.
Turn the dial to select ON (protect enabled)
or OFF (protect disabled).
When a project is loaded for which protect is ON, a lock
symbol is shown in the top right of the display.
PRJ 008 PRJ 008
PRJ008 PRJ008
A change in the protect status becomes active
immediately. To return to the main screen after making
the setting, press the [EXIT] key several times.
ZOOM MRS-1608
Lock symbol
NOTE
A project that is not protected will be automatically saved
when power is turned off or when another project is loaded.
If you have finished a song, we recommend to turn protect
ON. This will prevent inadvertently saving changes caused
by operation steps that you have taken after finishing the
song.
Reference [Projects]
169