Create A New Project; Selecting Projects And Files - Zoom R16 Operation Manual

Project

Create a new project

With the R16 you can create up to 1000 projects on a single card. You can also transfer the settings of
the previous project to a new project.
1
Press [PROJECT].
Change menu
P R O J E C T
> S E L E C T
2
Select >NEW .
Change menu
P R O J E C T
> N E W [ S D ] 0 0 3 : 2 2 : 5 2 ]
Press [ENTER].
3
Confirm the project name.
New project number
P r o j e c t N o . 0 0 3
P R J 0 0 3
Blinks
New project name
Change the
name to be
saved
Press [ENTER].
4
Select whether to use the settings
from the last project.
Change menu
S E T T I N G ?
[ C O N T I N U E ] R E S E T
Select to use default settings
Press [ENTER].
5
Create the project.
N o . 0 0 3 : P R J 0 0 3
C r e a t e ?
Press [ENTER].
57
NOTE
You can use the settings and values of the last
project in the new one or use the R16 default
settings.
Settings carried over with CONTINUE
• BIT LENGTH setting
• INSERT EFFECT settings
• SEND RETURN EFFECT settings
• Track status (PLAY/MUTE/REC) settings
• BOUNCE settings
• REC TRACK settings
• Track parameter settings
• METRONOME settings
[RESET]
Use default setting values for every item
HINT
At Step 3, you can change the name of the new
project.
Ref.: Changing names P.43
Project

Selecting projects and files

You can select a project for recording, playback and editing from the top screen.
You can also select files for playback and assign them to tracks.
Select a project
PROJECT>SELECT
1
Press [PROJECT].
2
Select >SELECT .
Change menu
P R O J E C T
> S E L E C T
Press [ENTER].
3
Select the project.
P R O J E C T S E L E C T
N o . 0 0 2 : P R J 0 0 2
Change
Press [ENTER].
project
4
Load the project.
N o . 0 0 2 : P R J 0 0 2
L o a d ?
Press [ENTER].
NOTE
You can only playback and record to the project
that is currently loaded. You cannot load and use
multiple projects at the same time.
HINT
When the R16 [POWER] switch is turned ON, the
project loaded the last time the unit was used will
be loaded automatically. (If you have changed SD
cards, then the last project used on the inserted
card will be loaded.)
Select a file
PROJECT>FILE
1
Press [PROJECT].
2
Select >FILE .
Change menu
P R O J E C T
> F I L E
Press [ENTER].
3
Select the file.
Change track
T R A C K 1 5
M 1 5 T R 0 0 0 [ T R 1 ]
or use
[1 - 8] and
[MASTER]
Select file.
status keys
*If you want to listen to a file for confirmation,
you can use the following keys.
Playback: [PLAY] key
Stop: [STOP] key
Fast forward: [FF] key
Rewind: [REW] key
Zero return:
＋
[STOP] and [REW] keys
Moving to a marker:
[>>|] and [|<<] MARKER keys
Ref.: Track assignment P.23
58