Setting Various Sample Parameters - Zoom MRS-1608 Operation Manual

When you press the [ENTER] key in this condition, the
files inside the selected folder are displayed. Turn the dial
to select the desired file. By pressing the [EXIT] key, you
can return to the next higher level.
4.
When the file has been selected, press the
[ENTER] key.
Depending on the sampling frequency of the imported
audio file, the following applies.
●
Sampling frequency 44.1 kHz
The indication "IMPORT SURE?" appears on the
display. When you press the [ENTER] key, the audio file
is imported. When the process is complete, the sample
selection screen appears again.
●
Sampling frequency other than 44.1 kHz
When you press the [ENTER] key, a selection screen for
conversion to 44.1 kHz (resampling) appears.
WAV/AIFF WAV/AIFF
Resample ON ON Resample
Turn the dial to set resampling to ON or OFF. When you
press the [ENTER] key, the indication "WAV/AIFF
SURE?" appears. Press the [ENTER] key once more to
start the import process. When the process is complete,
the sample selection screen appears again.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
HINT
The name "SAMPLxxx" is automatically assigned to the
imported sample (where xxx is the sample number).
NOTE
Imported audio files are always played with a sampling
frequency of 44.1 kHz. If resampling was turned off during
the import process, a file with a different sampling frequency
will play back with a different pitch and tempo.
ZOOM MRS-1608

Setting various sample parameters

Samples imported into the sample pool have parameters
such as playback range and sample name that can be set.
1.
From the main screen, press the [RHYTHM]
key in the display section.
The key lights up, and the rhythm section can be used
independently.
2.
Press the [UTILITY/TRACK EDIT] key in the
display section.
The rhythm utility menu for making various rhythm
section settings appears.
3.
Use the cursor left/right keys to bring up
the indication "UTILITY SAMPLE" on the
display, and press the [ENTER] key.
A screen for selecting the sample appears on the display.
SAMPLE SAMPLE
SAMPL000 No.0 SAMPL000
Sample name
4.
Turn the dial to select the sample whose
parameters you want to adjust.
When you press the PLAY [
displayed sample is played. When the sample number is
empty, the indication "EMPTY" is shown in the sample
name field.
5.
Press the [EDIT] key.
A parameter of the selected sample is displayed.
SAMPL000 SAMPL000
START START
0 0 0 0 0 0 0
6.
Use the cursor up/down keys to call up the
parameter that you want to adjust.
●
START
Specifies the playback start point of the sample in
milliseconds. In the default condition, this is the
beginning of the sample.
Reference [Pad Sampler]
No.0
Sample number
R
] key, the currently
No.0 No.0
125