Changing The Function Of The Foot Switch - Zoom MRS-1608 Operation Manual

For example, when you select the tuner type "GUITAR",
the display shows the following information.
Tuner type
GUITAR GUITAR
E E
Target note for
string number
3.
Play the indicated string as an open string,
and perform tuning.
4.
Use the cursor up/down keys to select
other string numbers.
Tune the other strings in the same way.
5.
To quit the tuning function, press the [EXIT]
key.
The tuner is turned off, and the insert effect and send/
return effect will revert to the original condition.
HINT
If required, you can change the reference pitch (A = 440 Hz).
The procedure is the same as for the chromatic tuner.
ZOOM MRS-1608
String6 String6
String number
Changing the function of the
foot switch
With the default settings of a project, a foot switch
connected to the FOOT SW jack can be used to control play/
stop of the recorder. To use the foot switch to control manual
punch-in/out recording ( → p.39), use the following
procedure to change the internal setting.
1.
From the main screen, press the [UTILITY/
TRACK EDIT] key in the display section.
The indication "UTILITY TR EDIT" appears on the display.
2.
Use the cursor left/right keys to bring up
the indication "UTILITY SYSTEM" on the
display, and press the [ENTER] key.
The display indication changes as follows.
SYSTEM SYSTEM
FOOT SW FOOT SW
3.
Make sure the indication "SYSTEM FOOT
SW" is shown on the display, and press the
[ENTER] key.
The function currently assigned to the foot switch will be
displayed.
FOOT SW FOOT SW
PLY_STP PLY_STP
4.
Turn the dial to select "PLY_STP" or
"PUNCH IO".
The settings are as follows.
●
PLY_STP
Each push of the foot switch toggles between play and
stop of the recorder section.
●
PUNCH IO
The foot switch can be used to perform manual punch-in/
out. Pressing the foot switch has the same effect as
O
pressing the REC [ ] key.
5.
To return to the main screen, press the
[EXIT] key several times.
Reference [Other Functions]
181