Locating A Mark; Deleting A Mark - Zoom MRS-1608 Operation Manual

The mark number is assigned automatically in ascending
order from the beginning of the song. If you add a new
mark between two existing marks, the subsequent marks
will be renumbered.
Mark
00 00 01 0102 02
number
Song
Mark
00 00 01 0102 02
number
Song
HINT
Mark number 00 is already set at the beginning of the song
(the counter zero location). This cannot be changed.

Locating a mark

Here's how to move to the location of a mark. This can be
done in two ways: you can use key operations, or specify
the mark number directly.
◆ Using keys to locate
1.
From the main screen, press either the
U
MARKER [ ] or [
section.
Each time you press the key, the unit jumps to the next
mark before or after the current location.
Mark
Current location
Song
◆ Specifying the mark number to locate
1.
From the main screen, use the cursor left/
right keys to cause the mark number on the
counter to flash.
2.
Turn the dial to select the desired mark
number.
As soon as the number is changed, the recorder jumps to
that number.
ZOOM MRS-1608
Add a mark
03 03 04 04
03 03 04 04 05 05
I
] key in the control

Deleting a mark

Here's how to delete a mark that you assigned.
1.
Locate the mark that you want to delete.
A mark can only be deleted when it exactly matches the
current location. Make sure that the mark symbol is
shown. If not, use the MARKER [
jump to the exact marker point.
2.
Press the [CLEAR] key in the control
section.
The selected mark will be deleted, and subsequent marks
will be renumbered.
NOTE
• A deleted mark cannot be recovered.
• It is not possible to delete mark number "00" located at the
beginning of the song.
Reference [Recorder]
U I
] / [ ] keys to
47