Using The Send/Return Effect; About The Send/Return Effect Patches; Selecting A Send/Return Effect Patch; Editing A Send/Return Effect Patch - Zoom MRS-1608 Operation Manual

Using the send/return effect

This section explains how to select and edit patches for the
send/return effect (chorus/delay, reverb).
About the send/return effect
patches
The "reverb" and "chorus/delay" send/return effects are
separate and independent.
Reverb and chorus/delay each have an effect type that
determines the general sound of effect, and various
parameters that let you adjust the sonic character. Settings
for the effect type and parameters, together with a name, are
collectively called send/return effect "patches".
A newly created project contains 30 reverb patches and 30
chorus/delay patches. You can instantly switch reverb or
chorus/delay settings simply by choosing the effect and then
selecting a patch.
The number of patches available for each effect is as
follows.
Patch number
Effect
(preprogrammed patches)
REVERB
CHORUS/DELAY
Selecting a send/return effect
patch
This section explains how to select a reverb or chorus/delay
patch.
1.
Press the [REVERB] key or [CHORUS/DELAY]
key in the effect section.
When you press a key, a patch select screen for the respective
effect appears.
For example, when you have selected a reverb effect patch,
the following indication appears.
ZOOM MRS-1608
30 (22)
30 (18)
SEND REV SEND REV
TightHal TightHal No.0
Patch name
2.
Use the PATCH SELECT [W]/[Q] keys or the
dial to select the patch.
As you turn the dial, new patches will be recalled
immediately. If the track mixer REVERB SEND LEVEL or
CHORUS/DELAY SEND LEVEL parameter settings are
raised, you can press the PLAY [R] key to play back the
song, and listen to the result of the newly selected patch.
HINT
• For details on track mixer operations, refer to p. 80.
• The lit/out status of the [REVERB] or [CHORUS/DELAY] key
shows the on/off status of that module. Each push of the key
toggles the status.
3.
To return to the main screen, press the [EXIT]
key.

Editing a send/return effect patch

This section explains how to edit a send/return effect patch.
1.
Press the [REVERB] key or [CHORUS/DELAY]
key in the effect section.
2.
Use the PATCH SELECT [W]/[Q] keys or the
dial to select the patch to edit.
SEND CHO SEND CHO
DeepCho DeepCho
3.
Press the [EDIT] key.
The display will indicate "EDIT", and a screen will appear
in which you can edit the patch. When the [EDIT] key is
pressed, the effect type selected for that send/return effect is
shown.
TYPE TYPE
CHORUS CHORUS
Effect type
Reference [Effects]
No.0
Patch number
No.7 No.7
147