Editing Various Settings Of The Rhythm; Basic Procedure - Zoom MRS-1608 Operation Manual

Reference [Rhythm]
5.
Turn the dial to select the source project,
and press the [ENTER] key.
The subsequent steps differ, depending on which
selection was made in step 4.
• When ALL was selected
Verify that the indication "IMPORT SURE?" is shown on
the display. Proceed to step 7.
• When PATTERN was selected
The source rhythm pattern is shown on the display. Turn
the dial to select the desired rhythm pattern, and press the
[ENTER] key. You can now select the target pattern.
Proceed to step 6.
6.
Turn the dial to select the import target, and
press the [ENTER] key.
The indication "SURE?" appears on the display.
7.
To carry out the import process, press the
[ENTER] key.
When all patterns/songs have been imported, the rhythm
pattern or rhythm song selection screen appears again. If
a single pattern was imported, the display of step 5 returns
again.
To return to the main screen, press the [EXIT] key several
times.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
118
Editing various settings of
the rhythm section
This section explains how to edit various settings that
affect the entire rhythm section, such as adjusting the pad
sensitivity or adjusting the volume of the metronome.

Basic procedure

The basic procedure for editing the rhythm section
settings is the same for most items, as described below.
HINT
This procedure can be carried out either in rhythm pattern
mode or rhythm song mode.
1.
From the main screen, press the [RHYTHM]
key so that the key lights up.
Depending on the current operation mode of the rhythm
section, the rhythm pattern selection screen or rhythm
song selection screen appears.
2.
Press the [UTILITY/TRACK EDIT] key.
The rhythm utility menu for making various rhythm
section settings appears.
UTILITY UTILITY
SoundSel SoundSel
HINT
When the pad sampler function is being used, the indication
"UTILITY SPL PRG" appears instead of the above screen.
3.
Use the cursor left/right keys to select one
of the following items to edit, and press the
[ENTER] key.
• SoundSel
Select the drum sound set to be used by the rhythm
section ( → p. 90).
• COUNT
Change the length of the pre-count that is heard during
real-time input of a rhythm pattern.
• ClickVol
Change the volume level of the metronome that is heard
ZOOM MRS-1608