Creating Sampler Programs; Creating A New Sampler Program - Zoom MRS-1608 Operation Manual

Reference [Pad Sampler]
●
FADE I/O (Fade-in/out)
Perform fade-in/fade-out over a specified audio data
interval.
6.
Use the cursor left/right keys to select the
command, and press the [ENTER] key.
The subsequent steps are the same as described for the
respective editing commands in the track editing section
of this manual.
For REVERSE, see page 54. For FADE I/O, see page 53.
The only difference is that the range can only be specified
in minutes/seconds/milliseconds.
128

Creating sampler programs

Creating a new sampler program

To use samples that you have imported, you must first
create a blank sampler program in an unused program
number, as described below.
1.
From the main screen, press the [RHYTHM]
key in the display section.
The key lights up, and the rhythm section can be used
independently. Depending on the current operation status
of the rhythm section, the rhythm pattern or rhythm song
selection screen appears.
2.
Press the [DRUM] key and [BASS] key in
the rhythm section simultaneously.
Both keys light up, and the pad sampler can be used.
3.
Press the [UTILITY/TRACK EDIT] key.
The rhythm utility menu appears.
UTILITY UTILITY
SPL PRG SPL PRG
4.
Verify that the indication "UTILITY SPL
PRG" is shown, and press the [ENTER] key.
The sampler program menu for various sampler program
functions appears.
SPL PRG SPL PRG
SELECT SELECT
HINT
The sampler program menu only appears when the pad
sampler can be used.
5.
Use the cursor left/right keys to bring up
the indication "SPL PRG NEW" on the
display, and press the [ENTER] key.
The indication "PRG NEW SURE?" appears.
6.
To create a new program, press the
[ENTER] key.
When the sampler program has been created, the unit
returns to the rhythm pattern or rhythm song selection
ZOOM MRS-1608