Editing A Sampler Program; Assigning A Name To A Sampler Program; Copying A Sampler Program - Zoom MRS-1608 Operation Manual

Editing a sampler program

You can change the name of a sampler program or copy
it to another program. The sampler program editing
procedure is described below.
Assigning a name to a sampler
program
You can assign a name to a sampler program as follows.
1.
From the main screen, press the [RHYTHM]
key, so that the key lights up.
2.
Press the [DRUM] and [BASS] keys in the
rhythm section simultaneously.
Both keys light up. In this condition, the pad sampler can
be used.
3.
Press the [UTILITY/TRACK EDIT] key and
then press the [ENTER] key twice.
You can now select a sampler program to load into the
pad sampler.
4.
Turn the dial to select the sampler program
to which you want to assign a name, and
press the [ENTER] key.
The sampler program is loaded, and the unit returns to the
rhythm pattern or rhythm song selection screen.
5.
Press the [KIT/PROG] key.
The menu for making sampler program settings appears.
PAD:1-0 PAD:1-0
SAMPL000 SAMPL000
6.
Use the cursor left/right keys to bring up
the program name on the display.
NAME NAME
SPL PRG1 SPL PRG1
ZOOM MRS-1608
7.
Use the cursor left/right keys to move the
flashing section to the character you want
to change, and turn the dial to select the
new character.
For information on available characters, refer to page 36.
8.
Repeat step 7 until the name is as desired.
9.
When input is complete, press the [EXIT]
key.
The new name is saved, and the sampler program
selection screen appears again.
To return to the main screen, press the [EXIT] key several
times.

Copying a sampler program

You can copy a sampler program in the current project to
an unused program number, as follows.
HINT
If all program numbers are used up, the indication "PRG
FULL" appears, and the copy process cannot be carried out.
Delete unneeded sampler programs before proceeding.
1.
From the main screen, press the [RHYTHM]
key, so that the key lights up.
2.
Press the [DRUM] and [BASS] keys in the
rhythm section simultaneously.
Both keys light up. In this condition, the pad sampler can
be used.
3.
Press the [UTILITY/TRACK EDIT] key.
The display changes as follows.
UTILITY UTILITY
SPL PRG SPL PRG
4.
Verify that the indication "UTILITY SPL
PRG" is shown, and press the [ENTER] key.
The sampler program menu appears.
Reference [Pad Sampler]
131