Editing Using V-Takes; Basic Steps For V-Take Editing - Zoom MRS-1608 Operation Manual

HINT
The manual and automatic punch-in/punch-out functions
can also be used at this point.
11.
To start Duo Harmony generation, hold
O
down the REC [
R
[ ] key.
12.
When recording has progressed to the
point where you want harmony generation
to stop, press the STOP [
The indication "DUO HARM SURE?" appears on the
display.
13.
To confirm the operation, press the
[ENTER] key.
The editing result is written to the track. When the
process is complete, the unit returns to the track edit
menu.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
ZOOM MRS-1608
] key and press the PLAY
P
] key.

Editing using V-takes

Recorded audio data can also be edited in V-take units.
This is convenient to exchange the data on two V-takes or
delete a V-take that is no longer needed. The procedure is
explained in this section.

Basic steps for V-take editing

When editing audio data in V-take units, some steps are
similar for each action. These are as follows.
1.
From the main screen, press the [V-TAKE]
key in the track parameter section.
The key lights up, and a screen for selecting the V-take
appears on the display.
TR 1- 1 TR 1- 1
GTR 1- 1 GTR 1- 1
While this screen is shown, the level meter section of the
display indicates the V-take selection and the presence or
absence of audio data by the segment flashing/lit/out
status.
V-takes
1
Lit: recorded V-take
2
3
4
5 Flashing: currently selected V-take
6
7
8
Out: unrecorded V-take
9
10
Tracks
2.
Use the cursor left/right keys and the dial to
select a track and V-take.
The status key for the currently selected track is lit in
orange. Alternatively, you can press a status key to select
a track.
It is also possible to select the master track. In this case,
the track number indication shows "M".
Reference [Track Editing]
61