Moving A Specified Range Of Data - Zoom MRS-1608 Operation Manual

The display indication changes as follows.
Copy Dst Copy Dst
TO TO
0 2 213 13 0 0 058
7.
Specify the copy destination start point in
the same way as for the copy source, and
press the [ENTER] key.
The indication "COPY SURE?" appears on the display.
8.
To execute the copy operation, press the
[ENTER] key.
When the copy operation is completed, the unit returns to
the track edit menu.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
HINT
To paste the same range repeatedly, use the phrase loop
→
function ( p. 67).
Moving a specified range of data
You can move the audio data of a specified range to a
specified position on a specified track/V-take. This action
will overwrite the existing data at the destination
location. The move source data will be erased.
Move source track
Move
Move target track
1.
Refer to steps 1 – 6 of "Basic steps for
range editing" to select the move source
track/V-take, and press the [ENTER] key.
The display indication changes to "Move Src START".
Move Src Move Src
START START
0 0 0 0 0 0 0 001
ZOOM MRS-1608
058 3 3 0 0 00 00
001 1 1 0 0 00 00
2.
Use the cursor left/right keys to move the
flashing section of the counter, and turn the
dial to specify the move start point.
3.
Press the [ENTER] key.
The display indication changes to "Move Src END".
Move Src Move Src
END END
0 0 042 42230 230 032
4.
Use the same procedure as in step 2 to
specify the move range end point.
R
If you press the PLAY [
range will be played.
5.
Press the [ENTER] key.
The display changes to let you specify the move
destination track/V-take.
Move Dst Move Dst
TR 1- 1 TR 1- 1
6.
Specify the move destination track/V-take
in the same way as when selecting the
move source track/V-take, and press the
[ENTER] key.
The display changes to the screen for specifying the move
destination start point.
Move Dst Move Dst
TO TO
0 0 042 42230 230 032
7.
Specify the move destination start point in
the same way as for the move source, and
press the [ENTER] key.
The indication "MOVE SURE?" appears on the display.
8.
To execute the move operation, press the
[ENTER] key once more.
When the move operation is completed, the unit returns
to the track edit menu.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
Reference [Track Editing]
032 4 4 12 12 00 00
] key at this point, the specified
032 4 4 12 12 00 00
51