Selecting The Patch For The Insert Effect - Zoom MRS-1608 Operation Manual

2.
Press the [INPUT SOURCE] key.
The current insert position is shown on the display.
3.
Turn the dial to select the input to use as
insert position.
If the 8-track recording function is enabled, operation will be
different, depending on the selected algorithm.
● When 8x COMP EQ algorithm is selected
Select IN1-8. In this condition, all input [ON/OFF] keys are
lit in orange, and the effect is applied to inputs 1 - 8.
HINT
Effects in individual channels of the 8x COMP EQ algorithm can
be turned on or off individually.
● When another algorithm is selected
Select the input from IN1 - IN8 (input 1 - input 8) to which
you want to apply the effect. (The input [ON/OFF] key of the
selected input lights up in orange.) You can also use the input
[ON/OFF] keys to select the input. By pressing two [ON/
OFF] keys together, you can select a combination of any two
inputs. (Non-adjacent inputs can also be selected.)
The lower numbered input is assigned to the L channel and
the higher numbered input to the R channel.
HINT
If you have selected two inputs for the effect, the inputs will be
shown together on the display, in the format "INx/y" (where x/y
is the respective input number).
4.
When the insert position selection is
completed, press the [EXIT] key.
The main screen returns.
◆ Insertion to track output/immediately
before [MASTER] fader
1.
At the main screen, press the [INPUT
SOURCE] key in the effect section.
The current insert position is shown on the display.
2.
Turn the dial to select the insert position.
The status key of the selected track or the [MASTER] status
key lights up in orange. These keys can also be used to select
the insert position. If you press the adjacent status keys of an
odd-numbered and even-numbered input in succession,
"mono track x 2" is selected.
ZOOM MRS-1608
3.
When the insert position selection is
completed, press the [EXIT] key to return to
the main screen.
Selecting the patch for the insert
effect
This section explains how to select the patch for the insert
effect.
1.
Press one of the [ALGORITHM] keys in the
effect section. Select the key that
corresponds to the desired algorithm.
The respective key lights up, and the display shows the insert
effect patch select screen.
To select a patch for the insert effect, you must first specify
the algorithm (effect module combination). When you press
any [ALGORITHM] key, the first line of the display shows
"INSERT", and the second line shows a patch included in
the selected algorithm.
Effect type
INSERT INSERT
Standard Standard No.0
Patch name
NOTE
If you switch from another algorithm to the 8x COMP EQ
algorithm, the position will change to IN1 – 8, TR1 – 8, or TR9 –
16 (depending on the immediately preceding setting). Make sure
once more that the desired insert position is selected.
HINT
• Even if the 8-track recording function is disabled, the 8x
COMP EQ algorithm can process the output of tracks 1 – 8 or
9 – 16 of the track mixer. This is useful to individually process
the output of 8 tracks during mixdown.
• While making settings for the insert effect or send/return
effect, the [EFFECT] key in the display section is lit. When you
press the key at the main screen, the patch select screen for
the most recently used effect comes up.
Reference [Effects]
No.0
Patch number
141