Protecting A Project; Selecting A Project - Zoom R8 Operation Manual

Protecting and selecting projects

Protecting a project

PROJECT > PROTECT
You can protect the currently loaded
project to prevent it from being saved or
deleted so that its contents cannot be
changed.
1
Press
2
Select PROTECT.
3
Select .
On
NOTE
● When a project is protected, you cannot
record in it or edit it, and any changes will
not be saved to the SD card. Set PROTECT
to Off if you want to record in it or edit it
again.
● Projects that are not protected will be
automatically saved to the SD card when
you turn the POWER
another project.
● We recommend setting PROTECT to On
once you complete a piece of music to
avoid mistakenly saving unwanted changes
later.
HINT
● This icon appears
when a project is
protected.
Change menu
Change
switch OFF or load

Selecting a project

PROJECT > SELECT
Load a project saved on the SD card.
1
Press
2
Select SELECT.
Press
3
Select the project.
Press
NOTE
● You can only playback and record to the
project that is currently loaded. You cannot
use multiple projects at the same time.
HINT
● When you turn the
project loaded the last time the unit was
used will be loaded automatically.
Change menu
Change project
power ON, the
91