Returning System File Data To Factory Default (Factory Initialize); Returning The Entire Hard Disk To The Factory Default (All Initialize) - Zoom MRS-1608 Operation Manual

2.
Use the cursor left/right keys to select the
ScanDisk function.
●
AutoRepr (Auto Repair)
This function tests all files on the hard disk and
automatically repairs damaged files.
●
ChekFile (Check File)
This function only tests all files, but does not
automatically repair them. If a problem is found, a
message is displayed on the screen.
3.
To execute the selected function, press the
[ENTER] key.
ScanDisk starts. By pressing the [EXIT] key instead of
the [ENTER] key, you can cancel the operation and return
to the condition of step 1.
NOTE
Once ScanDisk has started, it cannot be interrupted by the
user. Never turn power to the unit off while ScanDisk is
running. Otherwise the hard disk may be destroyed.
4.
When ScanDisk is completed, press the
[EXIT] key.
The unit returns to the condition of step 1.
Returning system file data to
factory default (Factory Initialize)
This action restores only the system files and other data
necessary for operation of the MRS-1608. Projects
created by the user are not affected by this operation. Try
this procedure if operation of the MRS-1608 is still
unstable after running ScanDisk.
1.
Refer to steps 1 – 3 of "Basic maintenance
procedure" to bring up the indication "Init
Fac" on the display. Then press the
[ENTER] key.
The indication "Init Fac Sure?" appears on the display to
confirm the operation.
Init Fac Init Fac
Sure? Sure?
ZOOM MRS-1608
2.
To restore the system data, press the
[ENTER] key once more.
The factory initialize process starts. When it is complete,
the unit returns to the condition of step 1.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and return to the condition
of step 1.
Returning the entire hard disk to
the factory default (All Initialize)
This action formats the hard disk and restores system files
and various data necessary for operation. All existing
projects including demo song data will be erased.
• Once erased, user-created projects
cannot be restored. Use this function
with extreme care.
• To preserve projects, back them up to
CD-R/RW disc first (
1.
Refer to steps 1 – 3 of "Basic maintenance
procedure" to bring up the indication "Init
ALL" on the display. Then press the
[ENTER] key.
The indication "Init ALL Sure?" appears on the display to
confirm the operation.
Init ALL Init ALL
Sure? Sure?
2.
To carry out the initialization process, press
the [ENTER] key once more.
The all initialize process starts. When it is complete, the
unit returns to the condition of step 1.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and return to the condition
of step 1.
Reference [Other Functions]
p. 161).
→
185