Importing A V-Take From Another Project - Zoom MRS-1608 Operation Manual

Reference [Track Editing]
Importing a V-take from another
project
You can import any V-take from another project into a
specified track/V-take of the current project. Any audio
data on the destination V-take are overwritten by the
imported V-take.
Track in import source project
Import
Import destination track
1.
Refer to steps 1 – 5 of "Basic steps for V-
take editing" to select the import
destination track/V-take and to bring up the
indication "IMPORT" on the display. Then
press the [ENTER] key.
The name of the import source project is shown on the
display.
IMPORT IMPORT
PRJ004 PRJ004
Import source project name
2.
Turn the dial to select the import source
project, and press the [ENTER] key.
A track/V-take in that project is shown. While this screen
is shown, the level meter section of the display indicates
the status of the V-take in the source project by the
segment flashing/lit/out status.
PRJ006 PRJ006
GTR 1- 1 TR 1- 1 GTR 1- 1
V-take name
3.
Use the cursor left/right keys and the dial to
select the track/V-take to import.
When an unrecorded track/V-take is selected, the
indication "NO DATA" is shown instead of the V-take
name.
64
PRJ 004 PRJ 004
Project number
TR 1- 1
Track/V-take number
4.
Press the [ENTER] key.
The indication "IMPORT SURE?" appears on the
display. If audio data exist at the import destination, the
indication "OverWrt?" is shown. When the import
operation is performed, these data will be overwritten.
5.
To execute the import operation, press the
[ENTER] key once more.
When the import operation is completed, the unit returns
to the V-take selection menu.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
ZOOM MRS-1608