Importing A Wav/Aiff File - Zoom MRS-1608 Operation Manual

Reference [Pad Sampler]
5.
Press the [ENTER] key.
The display indication changes as follows.
ImprtSrc ImprtSrc
END END
0 0 0 2 2 10 10 002
6.
Specify the end point in the same way as in
step 4.
If you press the PLAY [
between the specified start and end points is played.
7.
When the import source has been
specified, press the [ENTER] key.
The indication "IMPORT SURE?" appears on the
display.
8.
To carry out the import process, press the
[ENTER] key once more.
When the import process is completed, the unit returns to
the sample selection screen. By pressing the [EXIT] key
instead of the [ENTER] key, you can cancel the operation
and back up one step at a time.
Importing a WAV/AIFF file
You can import an audio file (WAV/AIFF) from a CD-
ROM or CD-R/RW disc inserted in the CD-R/RW drive
or from the internal hard disk.
Before doing this, the following preparations are
necessary.
● When importing from the CD-R/RW drive
Insert a CD-ROM or CD-R/RW disc containing audio
files into the CD-R/RW drive.
● When importing from the internal hard
disk
Copy the audio files from a computer into a folder named
"WAV_AIFF" immediately under the root directory (top
level folder) of the internal hard disk.
The files must have the extension ".WAV" (for WAV files)
or ".AIF" (for AIFF files).
124
002 2 2 24 24 00 00
R
] key at this point, the range
NOTE
• To copy audio files to the internal hard disk, the optional UIB-
02 card is necessary. For information on using the option card,
see page 183.
• Any subfolders in the WAV_AIFF folder are not recognized by
the MRS-1608.
• The following procedure will not allow you to first listen to the
audio files. Confirm file content and file name before you start
the procedure.
1.
Refer to steps 1 – 7 of "Basic steps for
sample importing" to bring the indication
"WAV/AIFF" onto the display. Then press
the [ENTER] key.
The display now shows "IMPORT CD-ROM", and you
can select the source device.
IMPORT IMPORT
CD-ROM CD-ROM
2.
Use the cursor left/right keys to select the
source device: "CD-ROM" (CD-R/RW drive)
or "IntHDD" (internal hard disk), and press
the [ENTER] key.
The unit searches for WAV/AIFF files on the specified
device. When files are found, their names are listed on the
display.
IMPORT IMPORT
LOOP.WAV LOOP.WAV
File name
HINT
If you select CD-ROM as source without a disc in the drive,
the indication "IMPORT Ins Disc" appears on the display and
the tray of the CD-R/RW drive opens. To continue, insert a
disc containing audio files and press the [ENTER] key.
3.
Turn the dial to select the audio file to
import.
When accessing a disc in the CD-R/RW drive which has
audio files in a certain folder, turn the dial to display the
folder name. When a folder is selected, the indication
"Folder" is shown in the right side of the display.
IMPORT IMPORT
WAVFILES WAVFILES Folder
Folder name
Folder
ZOOM MRS-1608