Table of Contents
Advertisement
Book
TOC
Chapter
TOC
Search
Quit
Installing Ink Cartridges
Your machine is a dual cartridge Inkjet printer. You must use a
black and a color ink cartridge. When viewed from the front of the
machine, the Black Ink Cartridge installs in the right Cartridge
Holder while the Color Ink Cartridge installs in the left Cartridge
Holder. An optional Photo Ink Cartridge, which can be installed in
place of the Black Ink Cartridge, is also available.
When installing ink cartridges, you must provide specific
information to the Workcentre 480cx about the cartridges you
install. This allows the printer to keep track of which cartridges
are installed and to gauge ink cartridge utilization. There are two
methods of entering this information. You may enter the required
information directly via the WorkCentre 480cx control panel or
you can update Ink Cartridge information using the WorkCentre
480cx Control Software and a PC.
The procedures in this section cover Ink Cartridge Installation
without using the WorkCentre 480cx Control Program. To install
Ink Cartridges using the WorkCentre 480cx Control Program,
refer to
The Xerox WorkCentre Control
Previous Page
Program.
1-12
Next Page
Advertisement
Table of Contents
Troubleshooting
