Delete Rcu Operation - HP XP20000/XP24000 Reference Manual

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Delete Path,,Normal end,,,Seq.=xxxxx
+{S/N,MCU LDKC,MCU,RCU LDKC,RCU,SSID,Controller ID}={99999,0x00,0x3F,0x00,0x7F,0x0004,5}
++{MCU Port,RCU Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},{5H,7H}],
Num of Port Pairs=8
[RCU]
Remote Control Unit function
Delete Path
Delete Path operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 240 Delete Path Operation
Item
S/N
MCU LDKC
RCU LDKC
Path Gr.ID
Controller ID
MCU
RCU
SSID
MCU Port
RCU Port
Num of Port Pairs

Delete RCU Operation

Example 1 (CU Free is used)
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Delete RCU,,Normal end,,,Seq.=xxxxx
+{S/N,MCU LDKC,RCU LDKC,Path Gr.ID,Controller ID}={99999,0x00,0x00,Default,5}
Example 2 (CU Free is not used)
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Delete RCU,,Normal end,,,Seq.=xxxxx
+{S/N,MCU LDKC,MCU,RCU LDKC,SSID}={99999,0x00,0x3F,0x00,0x0004}
[RCU]
Remote Control Unit function
Delete RCU
Delete Remote Control Unit operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
196 RCU Function
Description
The serial number of the device of RCU where the path has been deleted.
The LDKC number of the connected LDKC.
The LDKC number of the paired LDKC.
The path group ID of the path deleted. When the path group is a default setting, Default
is output.
The controller ID of the RCU where the path has been deleted.
The CU number of the connected CU.
The CU number of the paired CU.
Indicates SSID.
The port number of MCU.
The port number of RCU.
The number of path pairs deleted.
Table 240 (page 196).