Table 137 M/F DCR Operation
Item
LDKC:CU:LDEV
Define
Mode
Prestaging
Start CC-HH
End CC-HH
Num of DCR
Settings
New Installation Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,GMT,[Install],New Installation,,Normal end,,,Seq.=xxxxx
+Micro Program={Minimum Config,DKCMAIN,RAMBOOT,LCP,HTP,LCDG,FCDG},
Num. of Kind=7
[Install]
Install function
New Installation
New Installation operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 138 New Installation Operation
Item
Micro Program
Num. of Kind
Open DCR (Cache Residency Manager) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Open DCR,,Normal end,,,Seq.=xxxxx
+LDKC:CU:LDEV=0x00:0x00:0x00
++{Define,Mode,Prestaging,Start LBA,End LBA}=[{Set,Bind,No,0,2015},
{Set,Priority,Yes,3636,4175},{Delete,-,-,3636,4175}],Num. of DCR Setting=3
[Install]
Install function
Open DCR
130 Install Function
Description
The LDKC, CU, and LDEV numbers of the logical volume (for a mainframe system) where
Cache Residency is set
The setting status of Cache Residency
Set: set, Delete: cancel
The setting mode of Cache Residency - Indicates a dash (-) when Define is Delete
Bind: Bind mode, Priority: Priority mode
Indicates whether the Prestaging mode set is enabled or disabled. Indicates a dash (-)
when Define is Delete.
No: Prestaging mode is disabled, Yes: Prestaging mode is enabled
The starting cylinder number (CC) and the starting head number (HH) which the Cache
Residency is set or canceled
The ending cylinder number (CC) and the ending head number (HH) which the Cache
Residency is set or canceled
The number of Cache Residency which has been set or canceled
Description
The type of microcode installed.
The number of each type of installed microcode.
Table 138 (page
130).