Table 286 Make Volume Operation (continued)
Item
Unit
System Disk
Num. of LDEVs
Set SSID Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[VLL],Set SSID,,Normal end,,,Seq.=xxxxxx
+{SSID,LDKC:CU:LDEV}=[{XXXXX,0xXX:0xXX:0xXX},{XXXXX,0xXX:0xXX:0xXX}],Num. of SSIDs=2
[VLL]
Virtual LVI / Virtual LUN function
Set SSID
Set SSID operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 287 Set SSID Operation
Item
SSID
LDKC:CU:LDEV
Num. of SSIDs
System Disk Options Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[VLL],System Disk Options,,Normal end,,,Seq.=xxxxx
+{Option,Set,Result}=[{Additional configuration Back up,Enable,Normal}],Num. of Modes=1
[VLL]
Virtual LVI / Virtual LUN function
System Disk Options
System Disk Options operation
Normal end
The operation has ended normally
Seq.=xxxxxx
Serial number of log information (0000000000 to 4294967295)
Detailed Information
Description
The unit of the CV capacity. The unit varies according to the setting.
KB: For open-system volume
Cyl: For mainframe-system volume
LBA: When LBA is specified
Indicates system disk status
Enable: Enabled, Disable: Disabled
The number of LDEVs
Description
The SSID number
The SSID specified when Volume Initialize or Make Volume is executed is also output.
The LDKC, CU, and LDEV numbers
The number of SSID
Table 287 (page
231).
Set SSID Operation 231