[Rcu] Delete Path; [Rcu] Delete Rcu - HP StorageWorks P9000 Reference Manual

Item
Round Trip Time(ms)
FREEZE

[RCU] Delete Path

Example 1: CU Free is used
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[RCU],Delete Path,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{S/N,MCU LDKC,RCU LDKC,Path Gr.ID,Controller ID}
={99999,0x00,0x00,Default,4}
++{MCU Port,RCU Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},
{1G,3G},{5G,7G},{1H,3H}],Num. of Port Pairs=7
Example 2: CU Free is not used
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[RCU],Delete Path,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{S/N,MCU LDKC,MCU,RCU LDKC,RCU,SSID,Controller ID}
={99999,0x00,0x3F,0x00,0x7F,0x0004,5}
++{MCU Port,RCU Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},
{1G,3G},{5G,7G},{1H,3H}],Num. of Port Pairs=7
Detailed information
Item
S/N
MCU LDKC
RCU LDKC
Path Gr.ID
Controller ID
MCU
RCU
SSID
MCU Port
RCU Port
Num. of Port Pairs

[RCU] Delete RCU

Example 1: CU Free is used
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[RCU],Delete RCU,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
148 Audit log examples
Description
The round-trip response time (delay time for round-trip remote I/O) after change. The unit is in
milliseconds. This value is output when Continuous Access Synchronous or Continuous Access
Synchronous Z is used.
Indicates whether CGROUP (FREEZE/RUN) PPRC TSO command support is enabled or disabled.
This value is output only when Continuous Access Synchronous Z is used.
Enable or Disable is output.
Description
The serial number of the device of RCU where the path has been deleted.
The LDKC number of the connected LDKC.
The LDKC number of the paired LDKC.
The path group ID of the path deleted. When the path group is a default setting, "Default" is
output.
The controller ID of the RCU where the path has been deleted.
The CU number of the connected CU.
The CU number of the paired CU.
Indicates SSID.
The port number of MCU.
The port number of RCU.
The number of path pairs deleted.