Sim Complete Operation - HP XP20000/XP24000 Reference Manual

Table 18 Set Syslog Server Operation
Item
DetailFlg
LocationInfo
ServerType
IPAddrVer
OutFlg
SrvAddr
SrvPortNum

SIM Complete Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[AuditLog], SIM Complete,,Normal end,,,
Seq.=xxxxx
+Reference Code=[0x7C0300],Num. of Reference Codes=1
[Audit Log]
Audit Log function
SIM Complete
SIM Complete operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
If enabled, detailed information appears for this operation, as shown in
Table 19 SIM Complete Operation
Item
Reference Code
Num. of Reference
Codes
46 Audit Log Function
Description
Indicates whether to output detailed information to the syslog server.
Enable: Output detailed information. Disable: Do not output detailed information.
The location identification information for the storage system. Not output when setting is
not changed.
The syslog server to which information is output. Not output when setting is not changed.
Primary: Primary syslog server. Secondary: Secondary syslog server.
The version number of the internet protocol. If the setting is not changed, a hyphen (-) is
displayed.
IPv6: Internet Protocol Version 6. IPv4: Internet Protocol Version 4
Whether to transfer the syslog information to the syslog server.
Enable: Transfer syslog information. Disable: Do not transfer syslog information.
The IP address to which the syslog information is sent. If the setting is not changed, a
hyphen (-) is displayed.
The port number of the LAN when sending the syslog information. If the setting is not
changed, a hyphen (-) is displayed.
Description
The SIM reference code of the error and service request.
The number of SIM reference codes.
Table 19 (page 46).