Table 180 Set Channel Speed Operation
Item
Port
Speed(Gbps)
Num. of Ports
Set Command Device (CommandDev) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Set CommandDev,,Normal end,,,Seq.=xxxxx
+{LDKC:CU:LDEV,CommandDev}=[{0xXX:0xXX:0xXX,Disable},{0xXX:0xXX:0xXX,Enable}],
Num.of LDEVs=2
[LUNM]
LUN Manager function
Set CommandDev
Set CommandDev operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 181 Set CommandDev Operation
Item
LDKC:CU:LDEV
CommandDev
Num. of LDEVs
Set Command Device Security (CommandDev Sec) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Set CommandDevSec,,Normal end,,,Seq.=xxxxx
+{LDKC:CU:LDEV,CommandDevSec}=[{0xXX:0xXX:0xXX,Disable},{0xXX:0xXX:0xXX,Enable}],
Num.of LDEVs=2
[LUNM]
LUN Manager function
Set CommandDevSec
Set CommandDevSec operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Description
The name of the port that the host speed (data transfer speed) is set.
The host speed set. The unit is Gbps (Gigabits per second). When Auto is set for the host
speed, Auto is output.
The number of ports where the host speed is set.
Description
The LDKC, CU, and LDEV numbers of the logical volume where the command device
setting is changed
Indicates whether the command device setting is enabled or disabled
Disable or Enable will appear
The number of logical volumes where the command device setting is changed
Table 181 (page
Table 182 (page
Set Command Device (CommandDev) Operation 157
157).
158).