Set All Priority (Prio) Port Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00 [Perf Ctrl],Set All Prio Port,,Normal end,,,
Seq.=xxxxx
+{AllPriority,Treshold,Mode}={Enable,XXXXXXXX,IOPS}
[Perf Ctrl]
XP Performance Control (Perf Ctrl) function
Set All Prio Port
Set All Prio Port operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295).
Detailed Information
Detailed information displays for this operation, as shown in
Table 219 Set All Prio Port Operation
Item
AllPriority
Threshold
Mode
Set All Priority (Prio) WWN Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Perf Ctrl],Set All Prio WWN,,Normal end,,,Seq.=xxxxx
+{AllPriority,Threshold,Mode}={Enable,XXXXXXXX,IOPS}
[Perf Ctrl]
XP Performance Control (Perf Ctrl) function
Set All Prio WWN
Set All Prio WWN operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295).
Detailed Information
Detailed information displays for this operation, as shown in
Description
The setting status of the All Thresholds value in the port tab.
Enable: All Thresholds value is set.
Disable: All Thresholds value is cancelled.
The All Thresholds value set.
This value is output only when the All Thresholds value is set.
The rate type of the All Thresholds value.
IOPS: I/O rate, KB/s: Transfer rate.
This value is output only when the All Thresholds value is set.
Table 219 (page
181).
Table 220 (page
182).
Set All Priority (Prio) Port Operation
181