Micro Program Operation - HP XP20000/XP24000 Reference Manual

Table 134 Make Vol./Vol. Init
Item
PG
LDKC:CU:LDEV
Emulation
Size
Unit
System Disk
SSID
Num. of LDEVs

Micro Program Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,GMT,[Install],Micro Program,,Normal end,,,Seq.=xxxxx
+Micro Media=Floppy Disk
+Exchange How=Online
+Open Port Mode=Stop SCSI
+Reboot Grp.=By 1/2
+{Micro Kind, Old Ver, New Ver}=[{DKCMAIN, 5007000000, 5007000001},
{SVP, 50070000, 50070001},(snip)],Num.of Kind=10
[Install]
Install function
Micro Program
Micro Program operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 135 Micro Program Operation
Item
Micro Media
Exchange How
Open Port Mode
Reboot Grp.
Micro Kind
Old Ver
128 Install Function
Description
The parity group number
The LDKC, CU, and LDEV numbers
The emulation type
The capacity of CV
The unit of the capacity of CV
The setting status of system disk
Disable or Enable will appear.
The subsystem ID
The number of LDEVs
Description
The media which the microcode to be exchanged is stored (Floppy disk, CD-ROM, SVP
HDD, HDD Backup or remote transfer).
The method to exchange the microcode.
Online: Exchanging the microcode online, Offline: Exchanging the microcode offline.
The port exchange mode of an open system (Stop SCSI, Non-Stop SCSI, Skip SCSI
Normal, Skip SCSI Force, Alternate Manual, or Alternate Auto). However, it is not output
when the PCB of the open system is not installed, or MP reboot is not executed.
The reboot group (By1/2, By1/4, or By One). However, it is not output when microcode
is changed offline, or MP reboot is not executed.
The kind of microcode.
The old version number of the microcode.
Table 135 (page 128).