Resume Pair Operation - HP XP20000/XP24000 Reference Manual

Table 263 Function Switch Operation
Item
Switch

Resume Pair Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[TC],Resume Pair,,Normal end,,,Seq.=xxxxxx
+{M-VOL(LDKC:CU:LDEV),R-VOL(LDEV),Fence Level,Copy Pace,Priority,TS,Range,Error Level,
Result}=
-{0x00:0x00:0x00,0xFE,Never,15,256,-,Group,Group,Normal End},
{0x00:0x00:0x01,0xFF,Never,15,256,-,Group,Group,Normal End},(snip)
-(snip), Num. of Pairs=xx
[TC]
TrueCopy for Mainframe function (for IBM z/OS)
Resume Pair
Resume Pair operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 264 Resume Pair Operation
Item
M-VOL
(LDKC:CU:LDEV)
R-VOL (LDEV)
Fence Level
Copy Pace
Priority
TS
Range
Description
Each bit position (on/off) of the function switch information assigned by 64 bits. The
beginning of the string is bit 0 and the ending of it is bit 63. "0" indicates the bit is off,
and "1" indicates the bit is on.
In the example above, bit 3 and bit 5 are on and the other bits are off.
Description
The LDKC, CU, and LDEV numbers of the main volume in the restored pair
The LDEV number of the remote volume in the restored pair
The fence level set (the condition that MCU rejects the write operation to the primary
volume)
Never: No condition, Data: S-VOL data, Status: S-VOL status
The initial copy speed set (the number of tracks you can copy at a time by restoring)
The priority of the restoring operation set (scheduling order)
Indicates whether or not the host I/O time stamp is transferred to R-VOL when the pair
is restored. This value is output only when the synchronous pair is restored. When the
asynchronous pair is restored, a hyphen (-) is output.
Enable: transferred, Disable: not transferred
The resume range set (the range to restore the asynchronous pair). This value is output
when the asynchronous pair is restored only.
Volume: Volume (appropriate TrueCopy for Mainframe Asynchronous pairs only)
Group: Group (all suspended TrueCopy for Mainframe Asynchronous pairs in the
consistency group)
Table 264 (page 215).
Resume Pair Operation 215